14x14 Shed Material List

Quick Answer

A 14x14 gable shed with 8 ft walls, 16 inch on center framing, 4/12 roof pitch, pressure treated floor framing, OSB or plywood sheathing, a basic double door, and gravel foundation is a large square structure often used as a workshop, hobby space, riding mower garage, or general-purpose storage building. The 14 ft span requires heavy structural members, even though the footprint is more compact than long rectangular sheds.

See all shed material lists by size

You will need:

• Heavy pressure treated lumber for the floor system
• 2x4 wall framing
• 2x8 or larger roof framing
• Floor, wall, and roof sheathing
• Panel or lap siding
• Asphalt shingles and underlayment
• Reinforced double door framing
• Large quantities of fasteners and hardware

Realistic 2026 total material cost: $5,200 to $8,200

This assumes a gravel base and basic exterior finishes only.

Need a smaller option? See our 8x24 shed material list. Want a larger build? See our 10x20 shed material list.

Full Material List

Quantities assume 8 ft wall height, 16 inch on center spacing, and a standard double door on one side.

Floor Framing

A 14 ft span requires heavy joists to prevent noticeable deflection.

Gravel Base

• 5.5 to 7.5 cubic yards of compacted 3/4 inch crushed gravel

Floor Frame (Pressure Treated)

Perimeter

• 2x12x14 PT – 4 (rim and band joists)

Floor Joists (16 inch OC across 14 ft span)

• 2x12x14 PT – 10 to 11

Floor Sheathing

• 3/4 inch tongue and groove plywood or OSB – 7 sheets

Fasteners

• Exterior-rated screws or galvanized framing nails
• Heavy-duty joist hangers strongly recommended

Wall Framing

Framed 16 inch on center.

• 2x4x8 studs
• 95 to 110 total
• Includes perimeter walls
• Additional studs for corners and door framing
• Waste allowance

Plates

• 2x4x14 – 8 (double top plates + bottom plates for four walls)

Double Door Framing

Typical opening: 60 to 72 inches wide.

• 2x12x8 – 2 (header material)
• 1/2 inch plywood spacer
• Jack and king studs included in stud count

Roof Framing

A 14 ft span typically requires 2x8 rafters.

Rafters (4/12 pitch, 16 inch OC)

• 2x8x16 – 22 to 24
• Approximately 11 to 12 rafter pairs

Ridge Board

• 2x12x14 – 1

Collar Ties or Ceiling Joists

• 2x4x14 – 11 to 12

Sheathing

Wall Sheathing

• 7/16 inch OSB or plywood – 16 to 18 sheets
• Panel siding may eliminate separate sheathing

Roof Sheathing

• 7/16 inch OSB or plywood – 10 to 11 sheets

Siding

Panel siding is common for sheds of this size.

T1-11 or LP SmartSide Panels

• 16 to 18 sheets

Alternative siding systems require additional trim and backing materials.

Roofing

Underlayment

• 2 rolls synthetic underlayment

Drip Edge

• 8 to 10 pieces (10 ft lengths)

Shingles

• Approximately 2.75 to 3 squares
• 10 to 12 bundles depending on waste

Roofing Nails

• 8 to 10 lb box

Hardware and Fasteners

• 16d framing nails or structural screws
• 8d nails for sheathing
• Exterior construction screws
• Construction adhesive (5 to 6 tubes)
• Hurricane ties recommended
• Heavy-duty hinges (3 per door)
• Exterior double-door latch or lockset
• Padlock hardware
• Flashing for door header

Estimated Cost Breakdown

Typical 2026 pricing ranges.

• Gravel Base: $320 to $650
• Pressure Treated Floor Framing: $1,300 to $2,000
• Wall Framing Lumber: $900 to $1,500
• Roof Framing Lumber: $900 to $1,400
• Sheathing (walls and roof): $1,300 to $2,000
• Siding (T1-11): $1,000 to $1,600
• Siding (LP SmartSide): $1,700 to $2,700
• Siding (Vinyl system): $2,200 to $3,500
• Roofing: $700 to $1,100
• Hardware and Fasteners: $300 to $600

Total Estimated Range

With basic panel siding: $5,200 to $6,800

With upgraded siding: $6,800 to $8,200

Costs are driven by:

• Large floor area (196 sq ft)
• Heavy framing for 14 ft span
• Significant sheathing quantities
• Large roof surface
• Reinforced door framing
• Fixed hardware costs
• Availability of long pressure-treated lumber can significantly affect pricing

If you want exact cut diagrams, printable framing layouts, and step-by-step blueprints for this 14x14 shed, detailed plans eliminate guesswork and reduce lumber waste.

Get the Complete 14x14 Shed Plans Here

Tools Required

Standard framing tools plus equipment for heavy components.

Essential tools:

• Circular saw
• Miter saw
• Drill and impact driver
• Framing hammer
• 4 ft or longer level
• Speed square
• Tape measure
• Chalk line
• Multiple ladders
• Shovel and rake
• Plate compactor or heavy hand tamper

Helpful tools:

• Framing nailer
• Roofing nailer
• Laser level
• Sawhorses
• Clamps

Assistance is recommended due to material weight.

Step-by-Step Build Overview

High-level sequence only.

• Prepare and compact gravel base across footprint.
• Build pressure treated floor frame and verify square.
• Install floor sheathing.
• Frame walls on the ground including double door opening.
• Raise walls with assistance, plumb, and brace securely.
• Install double top plates tying walls together.
• Install ridge board and rafters.
• Add collar ties or ceiling joists.
• Install roof sheathing.
• Install drip edge and underlayment.
• Install shingles.
• Install wall sheathing if required.
• Install siding.
• Build and hang double doors.
• Install trim and hardware.
• Check square frequently to avoid alignment issues.

Common Mistakes

• Using undersized floor joists for wide spans. Leads to noticeable floor flex.
• Poor base preparation. Causes uneven settling.
• Losing square during wall assembly. Affects roof and siding alignment.
• Attempting to lift heavy walls without help. Unsafe and difficult.
• Underestimating materials. Causes delays and extra costs.
• Weak door framing. Leads to sagging doors over time.

Is It Worth Building Yourself?

DIY material cost: $5,200 to $8,200

Typical prebuilt 14x14 shed delivered in 2026: $9,500 to $16,000

DIY savings typically range from $4,000 to $8,000.

Consider:

• Build time of roughly 4 to 7 days with assistance
• Handling heavy lumber
• Need for precise layout
• Possible permit requirements

For homeowners comfortable with construction tasks, building yourself is usually financially worthwhile.

Get Exact Cut Diagrams and Printable Plans

This material list provides realistic quantities and cost expectations for a 14x14 shed.

It does not include:

• Exact rafter angle calculations
• Detailed wall framing layouts
• Header engineering details
• Precise overhang measurements
• Optimized cut lists
• Printable construction diagrams

On large structures, layout errors can waste significant time and material.

Detailed blueprints with exact measurements, framing layouts, and printable cut sheets simplify construction, reduce waste, and help ensure structural accuracy.

For a one-time large build, complete plans typically save more time and money than they cost by preventing mistakes and rework.

Get the Complete 14x14 Shed Plans Here